TECHNICAL INFORMATION
INSTALLATION NOTES
Drive Cool with Quality
Electric Water pump
Possible residues due to test procedures.
Please note the following information about possible particle residues in our electric water pumps.
GEBA No. 11235/1
Follow the correct tightening sequence.
Below are the correct tightening instructions for water pump 11235/1.
GEBA No. 11235/1
Filling & venting the cooling system
Below you will find the regulatory instructions for filling and venting the cooling system of pump 11235/1.
GEBA No. 10635/1
VW / Audi / Seat / Skoda
No. 04E 121 600 AD
For the pump with this original number please mount the supplied plug with hose clip.
GEBA No. 11220
VW / Audi / Seat / Skoda
No. 04L121011EX
- Reuse existing valve!
- Not variable.
- Insert and screw valve.
GEBA No. 11240
VW / AUDI / SEAT / SKODA
No. 04B121011D
- Reuse existing valve!
- Not variable.
- Insert and screw valve.
GEBA No. 11275
VW / AUDI / SEAT / SKODAÂ
No. 05L121011/C/D
- Reuse existing valve!
- Not variable.
- Insert and screw valve.
GEBA No. 13120
MERCEDES BENZ
276 200 0401 / 276 200 1301 /
276 200 1501
Reuse existing screw.
GEBA No. 13160
MERCEDES BENZ
276 200 0801
Reuse existing screw.
GEBA No. 13165
MERCEDES BENZ
278 200 0501 / 278 200 0701 /
278 200 1201 / 157 200 0201
(Step 1–3 only by: 278 200 0007 / 157 200 0107)
- Mount O-rings.
- Insert plug.
- Mount and tighten the plate. Use screw lock!
GEBA No. 13195
MERCEDES BENZ A2822000600, NISSAN 21010-00Q3K, RENAULT 21010-9334R UND DACIA 21010-9334R
Use only the screws supplied!
GEBA No. 55075
BMW 11518638026
- Please use the enclosed O-rings and screws!
Attention: 2 different O-rings, see picture! - Reuse these components.
- For the O-rings, please use acid-free grease (silicone grease) or coolant as lubricant.
